The AD-2 is a preamp and D.I. Box for acoustic guitars. It has a built-in dual band EQ so you can fine-tune the low and high frequencies, a treble boost to push the end when you need it and a clipping LED - If your input is too high the LED will go from Orange to Red, preventing any unwanted distortion!
Perfect for performing and recording with a balanced output to your mixer or recording device, at the same time enabling you to continue to use your acoustic amp as a stage monitor if you wanted. The AD-2 can be powered with a battery or a 9v DC power adapter.
Input level - controls the level of the signal input
Treble - boost or cut the treble band frequency
Bass - boost or cut the bass band frequency
Anti-feedback - use this to manually filter the howling frequency point (range from 80hz to 300hz), the anti feedback button must be activated.
Output level - controls the output signal level
Input - from your guitar
Output - out to your acoustic guitar amp (so you could use them as a monitor)
XLR Balanced out - straight to the mixing desk or your recording interface using the XLR input.
Anti-feedback - activate or deactivate the feedback filter
Treble boost - boosts the treble.
Input clip - This LED indicates if the input signal level. if it is distorted this will be red, amber is acceptable but some clipping may occur.
Input impedance 3.9 M ohm +/-5% @1k Hz
External Power supply DC9V 100mA / 9V layer-built battery (not included)
Operational current: 8ma
Unbalanced output impedance :1k ihm
Balanced output Impedance : 820 ohm
Item Weight 800 g
Product Dimensions 140 x 145 x 55mm